Special Offers
-
Hex Head Self Driller DIN 7504-K A2 Stainless Steel (6.3 X 25)
1000+ in stockRRP From £8.20 -
Cup Square Bolt DIN 603 A2 Stainless Steel (M6 X 40)
1000+ in stockRRP From £5.70 -
Nylon Insert Nut DIN 985 A2 Stainless Steel (M8)
1000+ in stockRRP From £2.88 -
Socket Set Flat Point Screw ISO 4026 A2 Stainless Steel (M6 X 8)
1000+ in stockRRP From £3.00
-
Flat Washer, Form C BS4320-C A2 Stainless Steel (M6)
1000+ in stockM6 flat washer (Form C, large OD) in A2 stainless steel to BS4320-C. The large outer diameter covers oversized holes and spreads clamping load over a wider bearing area than a standard Form A washer of...RRP From £2.75RRP From £2.75 -
Rect Sect Spring Washer DIN 127-B 1 Stainless Steel (M5)
1000+ in stockM5 spring washer in A2 stainless steel to DIN 127-B. Exerts continuous axial spring load on the nut face once tightened, resisting loosening under vibration and dynamic loading without thread locking compound. A2 (304 grade) gives...RRP From £1.91RRP From £1.91 -
Rect Sect Spring Washer DIN 127-B 1 Stainless Steel (M4)
1000+ in stockM4 spring washer in A2 stainless steel to DIN 127-B. Exerts continuous axial spring load on the nut face once tightened, resisting loosening under vibration and dynamic loading without thread locking compound. A2 (304 grade) gives...RRP From £1.91RRP From £1.91 -
Flat Washer, Form A DIN 125-A A2 Stainless Steel (M4)
1000+ in stockM4 flat washer in A2 stainless steel to DIN 125-A. Spreads clamping load under bolt heads and nuts, protecting timber, aluminium, and plastic substrates from damage. Good corrosion resistance for indoor and general outdoor assemblies. Free...RRP From £1.79RRP From £1.79 -
Flat Washer, Form A DIN 125-A A2 Stainless Steel (M3)
1000+ in stockM3 flat washer in A2 stainless steel to DIN 125-A. Spreads clamping load under bolt heads and nuts, protecting timber, aluminium, and plastic substrates from damage. Good corrosion resistance for indoor and general outdoor assemblies. Free...RRP From £1.79RRP From £1.79
Stainless steel washers to spread load, prevent bolt-head bite and lock joints against vibration. Form A flat washers (DIN 125-A) - the standard washer for most bolted joints. Form C wide-diameter washers (BS4320-C) - larger outside diameter to spread load into softwood or thin material. Rectangular section spring washers (DIN 127-B) - vibration-resistant, single-coil compression under the nut. M3 to M16 in A2 (304) and A4 (316) grade. DIY packs and Trade packs available, free next-day UK delivery on orders over £50.