Special Offers
-
6.3 X 25 Hex Head Self Drilling Screw DIN 7504-K A2 Stainless Steel
In stockRRP From £11.21 -
M8 Nylon Insert Nut DIN 985 A2 Stainless Steel
In stockRRP From £3.23 -
M6 X 20 Hex Non-Serrated Flange Screw DIN 6921 A2-70 A2 Stainless Steel
In stockRRP From £2.58 -
M8 Flat Washer, Form A DIN 125-A A2 Stainless Steel
In stockRRP From £2.69
-
5/16" UNC X 7/8" Hexagon Socket Cap Screw B18.3 A2 Stainless Steel
In stockThis 5/16" UNC x 7/8" socket cap screw is manufactured to B18.3 in A2 stainless steel (304 grade). B18.3 specifies a cylindrical head driven by an internal hexagon socket, making it suitable for counterbored holes and...RRP From £4.80RRP From £4.80 -
2BA X 5/8" Cross Recessed Csk Machine Screw DIN 965 A2 Stainless Steel
In stockThis 2 countersunk machine screw is manufactured to DIN 965 in A2 stainless steel (304 grade). DIN 965 specifies a 90 degree countersunk head with a cross recess drive, allowing the head to sit flush with...RRP From £3.99RRP From £3.99 -
2BA X 2" Csk Slotted Screw A2 Stainless Steel
In stockThis 2 countersunk machine screw is manufactured in A2 stainless steel (304 grade). The countersunk head draws into a matching seat and sits level with the work, giving a flush finish with a traditional slotted appearance.Typical...RRP From £6.34RRP From £6.34 -
80/48" Six Lobe Csk Chipboard Screw A2 Stainless Steel
In stockThis 80/48" chipboard screw is manufactured in A2 stainless steel (304 grade). The coarse twin-start thread pulls the screw in quickly with less driving effort than a traditional wood screw, and the sharp point starts without...RRP From £5.31RRP From £5.31 -
60/36" Poz Round Wood Screw DIN 7996 A2 Stainless Steel
In stockThis 60/36" round head wood screw is manufactured to DIN 7996 in A2 stainless steel (304 grade). DIN 7996 specifies a domed round head wood screw with a cross recess drive, for fixings that sit proud...RRP From £6.47RRP From £6.47 -
60/36" Poz Csk Chipboard Screw A2 Stainless Steel
In stockThis 60/36" chipboard screw is manufactured in A2 stainless steel (304 grade). The coarse twin-start thread pulls the screw in quickly with less driving effort than a traditional wood screw, and the sharp point starts without...RRP From £4.20RRP From £4.20 -
260/70" Six Lobe Csk Chipboard Screw A2 Stainless Steel
In stockThis 260/70" chipboard screw is manufactured in A2 stainless steel (304 grade). The coarse twin-start thread pulls the screw in quickly with less driving effort than a traditional wood screw, and the sharp point starts without...RRP From £17.59RRP From £17.59 -
100/70" Six Lobe Csk Chipboard Screw A2 Stainless Steel
In stockThis 100/70" chipboard screw is manufactured in A2 stainless steel (304 grade). The coarse twin-start thread pulls the screw in quickly with less driving effort than a traditional wood screw, and the sharp point starts without...RRP From £5.70RRP From £5.70 -
100/60" Poz Csk Chipboard Screw A2 Stainless Steel
In stockThis 100/60" chipboard screw is manufactured in A2 stainless steel (304 grade). The coarse twin-start thread pulls the screw in quickly with less driving effort than a traditional wood screw, and the sharp point starts without...RRP From £6.11RRP From £6.11 -
7/8" UNC American Wing Nut ASME B18.6.9 A2 Stainless Steel
Out of stockThis 7/8" UNC wing nut is manufactured to ASME B18.6.9 in A2 stainless steel (304 grade). ASME B18.6.9 specifies a nut with two projecting wings in place of hexagon flats, for hand tightening without a spanner....RRP From £15.19RRP From £15.19 -
5/16" UNC American Wing Nut ASME B18.6.9 A2 Stainless Steel
In stockThis 5/16" UNC wing nut is manufactured to ASME B18.6.9 in A2 stainless steel (304 grade). ASME B18.6.9 specifies a nut with two projecting wings in place of hexagon flats, for hand tightening without a spanner....RRP From £6.79RRP From £6.79 -
5/8" BSW American Wing Nut ASME B18.6.9 A2 Stainless Steel
In stockThis 5/8" BSW wing nut is manufactured in A2 stainless steel (304 grade). The wings allow the nut to be run on and released by hand, suiting assemblies that are dismantled often or where a spanner...RRP From £22.71RRP From £22.71 -
1/2" UNF American Wing Nut ASME B18.6.9 A2 Stainless Steel
In stockThis 1/2" UNF wing nut is manufactured to ASME B18.6.9 in A2 stainless steel (304 grade). ASME B18.6.9 specifies a nut with two projecting wings in place of hexagon flats, for hand tightening without a spanner....RRP From £18.67RRP From £18.67 -
1/4" UNC American Wing Nut ASME B18.6.9 A2 Stainless Steel
In stockThis 1/4" UNC wing nut is manufactured to ASME B18.6.9 in A2 stainless steel (304 grade). ASME B18.6.9 specifies a nut with two projecting wings in place of hexagon flats, for hand tightening without a spanner....RRP From £6.02RRP From £6.02 -
3/16" BSW American Wing Nut ASME B18.6.9 A2 Stainless Steel
In stockThis 3/16" BSW wing nut is manufactured in A2 stainless steel (304 grade). The wings allow the nut to be run on and released by hand, suiting assemblies that are dismantled often or where a spanner...RRP From £6.92RRP From £6.92 -
3/4" BSW American Wing Nut ASME B18.6.9 A2 Stainless Steel
Out of stockThis 3/4" BSW wing nut is manufactured in A2 stainless steel (304 grade). The wings allow the nut to be run on and released by hand, suiting assemblies that are dismantled often or where a spanner...RRP From £15.65RRP From £15.65 -
3/8" UNF American Wing Nut ASME B18.6.9 A2 Stainless Steel
In stockThis 3/8" UNF wing nut is manufactured to ASME B18.6.9 in A2 stainless steel (304 grade). ASME B18.6.9 specifies a nut with two projecting wings in place of hexagon flats, for hand tightening without a spanner....RRP From £16.95RRP From £16.95 -
1/2" UNC American Wing Nut ASME B18.6.9 A2 Stainless Steel
In stockThis 1/2" UNC wing nut is manufactured to ASME B18.6.9 in A2 stainless steel (304 grade). ASME B18.6.9 specifies a nut with two projecting wings in place of hexagon flats, for hand tightening without a spanner....RRP From £15.65RRP From £15.65 -
No.6 Stamped Cup Washer Stainless Steel
In stockThis stamped cup washer is manufactured in stainless steel. Pressed rather than machined, it gives the same flush seating for a countersunk head at a lower cost for volume work.Typical applications Joinery and cabinet fixing Panel...RRP From £3.16RRP From £3.16 -
1/4" UNF American Wing Nut ASME B18.6.9 A2 Stainless Steel
In stockThis 1/4" UNF wing nut is manufactured to ASME B18.6.9 in A2 stainless steel (304 grade). ASME B18.6.9 specifies a nut with two projecting wings in place of hexagon flats, for hand tightening without a spanner....RRP From £6.15RRP From £6.15 -
No.2 Rect Sect Spring Washer ANSI/ASME B18.21.1 Stainless Steel
Out of stockThis spring washer is manufactured to ANSI/ASME B18.21.1 in stainless steel. ANSI/ASME B18.21.1 specifies the imperial series of helical spring lock washers, for maintaining tension under vibration. The split ring compresses flat as the joint is...RRP From £6.41RRP From £6.41 -
10-32 UNF American Wing Nut ASME B18.6.9 A2 Stainless Steel
In stockThis 10 wing nut is manufactured to ASME B18.6.9 in A2 stainless steel (304 grade). ASME B18.6.9 specifies a nut with two projecting wings in place of hexagon flats, for hand tightening without a spanner. The...RRP From £5.98RRP From £5.98 -
5/16" UNF American Wing Nut ASME B18.6.9 A2 Stainless Steel
In stockThis 5/16" UNF wing nut is manufactured to ASME B18.6.9 in A2 stainless steel (304 grade). ASME B18.6.9 specifies a nut with two projecting wings in place of hexagon flats, for hand tightening without a spanner....RRP From £12.16RRP From £12.16 -
5/8" UNC American Wing Nut ASME B18.6.9 A2 Stainless Steel
In stockThis 5/8" UNC wing nut is manufactured to ASME B18.6.9 in A2 stainless steel (304 grade). ASME B18.6.9 specifies a nut with two projecting wings in place of hexagon flats, for hand tightening without a spanner....RRP From £20.08RRP From £20.08 -
No.4 Square Sect Spring Washer Stainless Steel
Out of stockThis spring washer is manufactured in stainless steel. The split ring is compressed flat under tightening and pushes back against the nut face, maintaining tension in the joint and helping resist loosening from vibration.Typical applications Joints...RRP From £6.95RRP From £6.95
Imperial thread and gauge sizes in stainless steel: UNC and UNF bolts, screws and nuts, BSW (Whitworth), BA machine screws and No. gauge screws.
For US-made machinery, older equipment and classic vehicles.