-
2-56 UNC X 3/8" Recess Pan DIN 7985 A2 Stainless Steel
In stockRRP From £5.19 -
2-56 UNC X 3/8" Pan Slotted A2 Stainless Steel
In stockRRP From £16.90 -
2-56 UNC X 3/8" Csk Slot Screw A2 Stainless Steel
In stockRRP From £4.81 -
2-56 UNC X 3/4" Slot Fillister Screw A2 Stainless Steel
In stockRRP From £5.98 -
2-56 UNC X 3/4" Pan Slotted A2 Stainless Steel
In stockRRP From £11.10 -
2-56 UNC X 3/16" Phillips Pan Head A2 Stainless Steel
In stockRRP From £16.84 -
2-56 UNC X 3/16" Pan Slotted A2 Stainless Steel
In stockRRP From £16.84 -
2-56 UNC X 1/8" Slot Fillister Screw A2 Stainless Steel
In stockRRP From £4.68 -
2-56 UNC X 1/8" Phillips Csk Screw A2 Stainless Steel
Out of stockRRP From £3.19 -
2-56 UNC X 1/8" Pan Slotted A2 Stainless Steel
In stockRRP From £11.45 -
2-56 UNC X 1/8" Csk Slot Screw A2 Stainless Steel
In stockRRP From £4.68 -
2-56 UNC X 1/4" Slot Fillister Screw A2 Stainless Steel
In stockRRP From £4.68 -
2-56 UNC X 1/4" Recess Pan DIN 7985 A2 Stainless Steel
In stockRRP From £6.99 -
2-56 UNC X 1/4" Pan Slotted A2 Stainless Steel
In stockRRP From £17.63 -
2-56 UNC X 1/4" Csk Slot Screw A2 Stainless Steel
In stockRRP From £6.75 -
2-56 UNC X 1/4" Csk Phillips Screw A2 Stainless Steel
In stockRRP From £16.05 -
2-56 UNC X 1/2" Slot Fillister Screw A2 Stainless Steel
In stockRRP From £4.68 -
2-56 UNC X 1/2" Pan Slotted A2 Stainless Steel
In stockRRP From £17.39 -
2-56 UNC X 1" Slot Fillister Screw A2 Stainless Steel
In stockRRP From £4.68 -
2-56 UNC X 1" Pan Slotted A2 Stainless Steel
Out of stockRRP From £10.30 -
2-56 UNC X 1" Csk Slot Screw A2 Stainless Steel
In stockRRP From £5.44 -
2" UNC X 3.16" Csk Slot Screw A2 Stainless Steel
In stockRRP From £6.26 -
12BA X 7/32" Slot Round Screw Stainless Steel
In stockRRP From £6.27 -
12BA X 7/16" Slot Round Screw Stainless Steel
In stockRRP From £6.27 -
12BA X 5/8" Csk Slotted Screw Stainless Steel
In stockRRP From £6.46
Stainless steel machine screws in A2 (304) and A4 (316), from miniature M1 up to M16, for tapped holes, nuts and fitted hardware.
- Pan head (DIN 85, DIN 7985 and ISO 14583): a low, rounded head that sits proud of the surface.
- Cheese head (DIN 84): a taller cylindrical head with a slot, suited to counterbored holes.
- Countersunk (DIN 963, DIN 965 and ISO 14581): sits flush in a countersunk hole.
- Raised countersunk (DIN 964 and DIN 966): a countersunk head with a slight dome for a neater finish.
Drives are slotted, Pozi, Phillips or six lobe, depending on the style. Most styles run up to M8 or M10, and countersunk slotted screws go up to M16. A small number of imperial UNC, UNF and BSW machine screws are also listed. Pair with a matching nut for through-bolted joints, or drive into a tapped hole.
Sizes, grades and pack quantities vary by product type. Check the individual product listing for the exact specification and current availability.