-
8-32 UNC X 5/8" Csk Slot Screw A2 Stainless Steel
Out of stockRRP From £5.16 -
8-32 UNC X 5/16" Phillips Pan Head A2 Stainless Steel
In stockRRP From £7.30 -
8-32 UNC X 5/16" Pan Slotted A2 Stainless Steel
In stockRRP From £8.04 -
8-32 UNC X 3/8" Slot Fillister Screw A2 Stainless Steel
In stockRRP From £3.81 -
8-32 UNC X 3/8" Phillips Csk Screw A2 Stainless Steel
In stockRRP From £12.03 -
8-32 UNC X 3/8" Pan Slotted A2 Stainless Steel
In stockRRP From £12.32 -
8-32 UNC X 3/8" Csk Slot Screw A2 Stainless Steel
In stockRRP From £5.08 -
8-32 UNC X 3/4" Slot Fillister Screw A2 Stainless Steel
In stockRRP From £4.04 -
8-32 UNC X 3/4" Phillips Pan Head A2 Stainless Steel
In stockRRP From £13.41 -
8-32 UNC X 3/4" Pan Slotted A2 Stainless Steel
In stockRRP From £14.19 -
8-32 UNC X 3/4" Csk Slot Screw A2 Stainless Steel
In stockRRP From £4.87 -
8-32 UNC X 1/4" Recess Pan Screw A2 Stainless Steel
In stockRRP From £3.41 -
8-32 UNC X 1/4" Phillips Csk Screw A2 Stainless Steel
In stockRRP From £12.68 -
8-32 UNC X 1/4" Pan Slotted A2 Stainless Steel
In stockRRP From £12.44 -
8-32 UNC X 1/2" Slot Fillister Screw A2 Stainless Steel
In stockRRP From £4.83 -
8-32 UNC X 1/2" Recess Pan DIN 7985 A2 Stainless Steel
In stockRRP From £3.77 -
8-32 UNC X 1/2" Pan Slotted A2 Stainless Steel
Out of stockRRP From £13.50 -
8-32 UNC X 1/2" Csk Slot Screw A2 Stainless Steel
Out of stockRRP From £5.03 -
8-32 UNC X 1.1/8" Phil Pan Head A2 Stainless Steel
In stockRRP From £8.11 -
8-32 UNC X 1.1/8" Pan Slotted A2 Stainless Steel
Out of stockRRP From £7.64 -
8-32 UNC X 1.1/4" Pan Slotted A2 Stainless Steel
In stockRRP From £9.54 -
8-32 UNC X 1.1/4" Csk Slot Screw A2 Stainless Steel
In stockRRP From £4.88 -
8-32 UNC X 1.1/2" Pan Slotted A2 Stainless Steel
In stockRRP From £10.01 -
8-32 UNC X 1.1/2" Csk Slot Screw A2 Stainless Steel
In stockRRP From £4.36 -
8-32 UNC X 1" Phillips Pan Head Screw A2 Stainless Steel
In stockRRP From £3.08
Stainless steel machine screws in A2 (304) and A4 (316), from miniature M1 up to M16, for tapped holes, nuts and fitted hardware.
- Pan head (DIN 85, DIN 7985 and ISO 14583): a low, rounded head that sits proud of the surface.
- Cheese head (DIN 84): a taller cylindrical head with a slot, suited to counterbored holes.
- Countersunk (DIN 963, DIN 965 and ISO 14581): sits flush in a countersunk hole.
- Raised countersunk (DIN 964 and DIN 966): a countersunk head with a slight dome for a neater finish.
Drives are slotted, Pozi, Phillips or six lobe, depending on the style. Most styles run up to M8 or M10, and countersunk slotted screws go up to M16. A small number of imperial UNC, UNF and BSW machine screws are also listed. Pair with a matching nut for through-bolted joints, or drive into a tapped hole.
Sizes, grades and pack quantities vary by product type. Check the individual product listing for the exact specification and current availability.