Special Offers
-
6.3 X 25 Hex Head Self Drilling Screw DIN 7504-K A2 Stainless Steel
In stockRRP From £11.21 -
M8 Flat Washer, Form A DIN 125-A A2 Stainless Steel
In stockRRP From £2.69 -
M8 Nylon Insert Nut DIN 985 A2 Stainless Steel
In stockRRP From £3.23 -
M10 Hexagon Full Nut DIN 934 A2 Stainless Steel
In stockRRP From £3.99
-
6BA X 1/2" Slot Round Screw A2 Stainless Steel
In stockThis 6 round head machine screw is manufactured in A2 stainless steel (304 grade). The domed head bears on the surface rather than countersinking into it, presenting a smooth rounded face where a flush finish is...RRP From £6.66RRP From £6.66 -
6BA X 1/2" Slot Cheese Head A2 Stainless Steel
In stockThis 6 cheese head machine screw is manufactured in A2 stainless steel (304 grade). The straight-sided head takes a deeper slot than a pan head of the same diameter, giving firm screwdriver purchase in a compact...RRP From £18.79RRP From £18.79 -
6BA X 1/2" Raised Slot Screw A2 Stainless Steel
In stockThis 6 raised countersunk machine screw is manufactured in A2 stainless steel (304 grade). The head seats into a countersink like a standard flat head but finishes with a shallow dome above the surface, giving a...RRP From £6.66RRP From £6.66 -
6BA X 1/2" Csk Slotted Screw A2 Stainless Steel
In stockThis 6 countersunk machine screw is manufactured in A2 stainless steel (304 grade). The countersunk head draws into a matching seat and sits level with the work, giving a flush finish with a traditional slotted appearance.Typical...RRP From £4.87RRP From £4.87 -
6BA X 1.1/4" Slot Round Screw A2 Stainless Steel
In stockThis 6 round head machine screw is manufactured in A2 stainless steel (304 grade). The domed head bears on the surface rather than countersinking into it, presenting a smooth rounded face where a flush finish is...RRP From £6.61RRP From £6.61 -
6BA X 1.1/4" Csk Slotted Screw A2 Stainless Steel
In stockThis 6 countersunk machine screw is manufactured in A2 stainless steel (304 grade). The countersunk head draws into a matching seat and sits level with the work, giving a flush finish with a traditional slotted appearance.Typical...RRP From £5.02RRP From £5.02 -
6BA X 1.1/2" Csk Slotted Screw A2 Stainless Steel
In stockThis 6 countersunk machine screw is manufactured in A2 stainless steel (304 grade). The countersunk head draws into a matching seat and sits level with the work, giving a flush finish with a traditional slotted appearance.Typical...RRP From £5.06RRP From £5.06 -
6BA X 1" Slot Round Screw A2 Stainless Steel
In stockThis 6 round head machine screw is manufactured in A2 stainless steel (304 grade). The domed head bears on the surface rather than countersinking into it, presenting a smooth rounded face where a flush finish is...RRP From £6.81RRP From £6.81 -
6BA X 1" Slot Cheese Head A2 Stainless Steel
In stockThis 6 cheese head machine screw is manufactured in A2 stainless steel (304 grade). The straight-sided head takes a deeper slot than a pan head of the same diameter, giving firm screwdriver purchase in a compact...RRP From £18.79RRP From £18.79 -
6BA X 1" Raised Slot Screw A2 Stainless Steel
In stockThis 6 raised countersunk machine screw is manufactured in A2 stainless steel (304 grade). The head seats into a countersink like a standard flat head but finishes with a shallow dome above the surface, giving a...RRP From £6.79RRP From £6.79 -
6BA X 1" Csk Slotted Screw A2 Stainless Steel
In stockThis 6 countersunk machine screw is manufactured in A2 stainless steel (304 grade). The countersunk head draws into a matching seat and sits level with the work, giving a flush finish with a traditional slotted appearance.Typical...RRP From £4.96RRP From £4.96 -
6-32 UNC X 9/16" Phillips Csk Screw A2 Stainless Steel
In stockThis 6 countersunk machine screw is manufactured to B18.6.3 in A2 stainless steel (304 grade). B18.6.3 specifies a 90 degree countersunk head with a cross recess drive, allowing the head to sit flush with the surface....RRP From £3.19RRP From £3.19 -
6-32 UNC X 7/8" Phillips Csk Screw A2 Stainless Steel
In stockThis 6 countersunk machine screw is manufactured to B18.6.3 in A2 stainless steel (304 grade). B18.6.3 specifies a 90 degree countersunk head with a cross recess drive, allowing the head to sit flush with the surface....RRP From £3.81RRP From £3.81 -
6-32 UNC X 7/16" Slot Fillister Screw A2 Stainless Steel
In stockThis 6 fillister head machine screw is manufactured in A2 stainless steel (304 grade). The head is taller and narrower than a cheese head, taking a deeper slot for firm screwdriver purchase while still fitting a...RRP From £4.68RRP From £4.68 -
6-32 UNC X 7/16" Phillips Csk Screw A2 Stainless Steel
In stockThis 6 countersunk machine screw is manufactured to B18.6.3 in A2 stainless steel (304 grade). B18.6.3 specifies a 90 degree countersunk head with a cross recess drive, allowing the head to sit flush with the surface....RRP From £17.88RRP From £17.88 -
6-32 UNC X 7/16" Pan Slotted A2 Stainless Steel
In stockThis 6 pan head machine screw is manufactured in A2 stainless steel (304 grade). The pan head spreads load over a wide bearing face without a countersunk seat, and the slotted drive suits hand assembly and...RRP From £10.30RRP From £10.30 -
6-32 UNC X 5/8" Slot Fillister Screw A2 Stainless Steel
In stockThis 6 fillister head machine screw is manufactured in A2 stainless steel (304 grade). The head is taller and narrower than a cheese head, taking a deeper slot for firm screwdriver purchase while still fitting a...RRP From £5.02RRP From £5.02 -
6-32 UNC X 5/8" Pan Slotted A2 Stainless Steel
In stockThis 6 pan head machine screw is manufactured in A2 stainless steel (304 grade). The pan head spreads load over a wide bearing face without a countersunk seat, and the slotted drive suits hand assembly and...RRP From £19.04RRP From £19.04 -
6-32 UNC X 5/8" Csk Slot Screw A2 Stainless Steel
In stockThis 6 countersunk machine screw is manufactured in A2 stainless steel (304 grade). The countersunk head draws into a matching seat and sits level with the work, giving a flush finish with a traditional slotted appearance.Typical...RRP From £6.75RRP From £6.75 -
6-32 UNC X 5/16" Phillips Pan Head A2 Stainless Steel
In stockThis 6 pan head machine screw is manufactured to B18.6.3 in A2 stainless steel (304 grade). B18.6.3 specifies a pan head with a cross recess drive, for general assembly into tapped holes and nuts. The pan...RRP From £19.89RRP From £19.89 -
6-32 UNC X 5/16" Pan Slotted A2 Stainless Steel
In stockThis 6 pan head machine screw is manufactured in A2 stainless steel (304 grade). The pan head spreads load over a wide bearing face without a countersunk seat, and the slotted drive suits hand assembly and...RRP From £17.76RRP From £17.76 -
6-32 UNC X 5/16" Csk Slot Screw A2 Stainless Steel
In stockThis 6 countersunk machine screw is manufactured in A2 stainless steel (304 grade). The countersunk head draws into a matching seat and sits level with the work, giving a flush finish with a traditional slotted appearance.Typical...RRP From £6.65RRP From £6.65 -
6-32 UNC X 3/8" Recess Pan DIN 7985 A2 Stainless Steel
In stockThis 6 pan head machine screw is manufactured to DIN 7985 in A2 stainless steel (304 grade). DIN 7985 specifies a pan head with a cross recess drive, for general assembly into tapped holes and nuts....RRP From £7.34RRP From £7.34 -
6-32 UNC X 3/8" Pan Slotted A2 Stainless Steel
In stockThis 6 pan head machine screw is manufactured in A2 stainless steel (304 grade). The pan head spreads load over a wide bearing face without a countersunk seat, and the slotted drive suits hand assembly and...RRP From £17.82RRP From £17.82 -
6-32 UNC X 3/4" Slot Fillister Screw A2 Stainless Steel
In stockThis 6 fillister head machine screw is manufactured in A2 stainless steel (304 grade). The head is taller and narrower than a cheese head, taking a deeper slot for firm screwdriver purchase while still fitting a...RRP From £4.68RRP From £4.68
Stainless steel machine screws in A2 (304) and A4 (316), from miniature M1 up to M16, for tapped holes, nuts and fitted hardware.
- Pan head (DIN 85, DIN 7985 and ISO 14583): a low, rounded head that sits proud of the surface.
- Cheese head (DIN 84): a taller cylindrical head with a slot, suited to counterbored holes.
- Countersunk (DIN 963, DIN 965 and ISO 14581): sits flush in a countersunk hole.
- Raised countersunk (DIN 964 and DIN 966): a countersunk head with a slight dome for a neater finish.
Drives are slotted, Pozi, Phillips or six lobe, depending on the style. Most styles run up to M8 or M10, and countersunk slotted screws go up to M16. A small number of imperial UNC, UNF and BSW machine screws are also listed. Pair with a matching nut for through-bolted joints, or drive into a tapped hole.
Sizes, grades and pack quantities vary by product type. Check the individual product listing for the exact specification and current availability.