Special Offers
-
6.3 X 25 Hex Head Self Drilling Screw DIN 7504-K A2 Stainless Steel
In stockRRP From £11.21 -
M8 Nylon Insert Nut DIN 985 A2 Stainless Steel
In stockRRP From £3.23 -
M6 X 20 Hex Non-Serrated Flange Screw DIN 6921 A2-70 A2 Stainless Steel
In stockRRP From £2.58 -
M8 Flat Washer, Form A DIN 125-A A2 Stainless Steel
In stockRRP From £2.69
-
M7 Retaining Ring Washer DIN 6799 Martensitic Stainless Steel
Out of stockThis M7 retaining ring washer is manufactured to DIN 6799 in stainless steel. DIN 6799 specifies a sprung E-shaped ring that snaps into a shaft groove, for locating a component on a shaft without a thread....RRP From £11.19RRP From £11.19 -
M6.5 Rect Sect Spring Washer DIN 127-B Stainless Steel
In stockThis M6.5 spring washer is manufactured to DIN 127-B in stainless steel. DIN 127-B specifies a split washer with a rectangular section and offset ends, for maintaining tension under vibration. The split ring is compressed flat...RRP From £7.37RRP From £7.37 -
M6 Wavey Washer DIN 137-B Stainless Steel
In stockThis M6 wave washer is manufactured to DIN 137-B in stainless steel. DIN 137-B specifies a ring waved along its circumference to act as a light spring, for taking up play and light axial preload. The...RRP From £7.02RRP From £7.02 -
M6 Single Tab Washer DIN 93 A4 Stainless Steel
In stockThis M6 single tab washer is manufactured to DIN 93 in A4 stainless steel (316 grade). DIN 93 specifies a washer with one tab that is bent up against the nut flat, for a positive mechanical...RRP From £12.84RRP From £12.84 -
M6 Safety Locking Washer, Type S A2 Stainless Steel
In stockThis M6 safety locking washer is manufactured in A2 stainless steel (304 grade). The cam faces between the pair are steeper than the thread pitch, so any attempt to turn the nut has to lift the...RRP From £5.16RRP From £5.16 -
M6 Retaining Ring Washer DIN 6799 Martensitic Stainless Steel
In stockThis M6 retaining ring washer is manufactured to DIN 6799 in stainless steel. DIN 6799 specifies a sprung E-shaped ring that snaps into a shaft groove, for locating a component on a shaft without a thread....RRP From £6.51RRP From £6.51 -
M6 Internal Tooth Washer DIN 6798-J A4 Stainless Steel
In stockThis M6 internal tooth lock washer is manufactured to DIN 6798-J in A4 stainless steel (316 grade). DIN 6798-J specifies a washer with serrated teeth projecting inward around the bore, for resisting loosening where the teeth...RRP From £11.38RRP From £11.38 -
M6 Internal Tooth Washer DIN 6798-J A2 Stainless Steel
In stockThis M6 internal tooth lock washer is manufactured to DIN 6798-J in A2 stainless steel (304 grade). DIN 6798-J specifies a washer with serrated teeth projecting inward around the bore, for resisting loosening where the teeth...RRP From £3.88RRP From £3.88 -
M6 Internal Tooth Washer DIN 6797-J A4 Stainless Steel
In stockThis M6 external tooth lock washer is manufactured to DIN 6797-J in A4 stainless steel (316 grade). DIN 6797-J specifies a washer with twisted teeth around the outer edge, for resisting loosening under vibration. The twisted...RRP From £11.42RRP From £11.42 -
M6 Internal Tooth Washer DIN 6797 A2 Stainless Steel
In stockThis M6 external tooth lock washer is manufactured to DIN 6797 in A2 stainless steel (304 grade). DIN 6797 specifies a washer with twisted teeth around the outer edge, for resisting loosening under vibration. The twisted...RRP From £2.33RRP From £2.33 -
M6 External Tooth Washer DIN 6798-A A4 Stainless Steel
In stockThis M6 external tooth lock washer is manufactured to DIN 6798-A in A4 stainless steel (316 grade). DIN 6798-A specifies a washer with serrated teeth projecting around the outer edge, for resisting loosening under vibration. The...RRP From £11.34RRP From £11.34 -
M6 External Tooth Washer DIN 6797-A Stainless Steel
In stockThis M6 external tooth lock washer is manufactured to DIN 6797-A in stainless steel. DIN 6797-A specifies a washer with twisted teeth around the outer edge, for resisting loosening under vibration. The twisted teeth dig into...RRP From £3.99RRP From £3.99 -
M6 External Tooth Washer DIN 6797-A A4 Stainless Steel
Out of stockThis M6 external tooth lock washer is manufactured to DIN 6797-A in A4 stainless steel (316 grade). DIN 6797-A specifies a washer with twisted teeth around the outer edge, for resisting loosening under vibration. The twisted...RRP From £7.35RRP From £7.35 -
M6 Double Tab Washer DIN 463 A2 Stainless Steel
In stockThis M6 double tab washer is manufactured to DIN 463 in A2 stainless steel (304 grade). DIN 463 specifies two tabs, one bent against the nut and one against the component, for locking where both nut...RRP From £5.40RRP From £5.40 -
M6 Curved Spring Washer DIN 128-A Stainless Steel
In stockThis M6 curved spring washer is manufactured to DIN 128-A in stainless steel. DIN 128-A specifies a washer curved along its length to act as a light spring, for maintaining tension in a joint. The curve...RRP From £8.40RRP From £8.40 -
M6 Curved Spring Washer DIN 128-A A4 Stainless Steel
In stockThis M6 curved spring washer is manufactured to DIN 128-A in A4 stainless steel (316 grade). DIN 128-A specifies a washer curved along its length to act as a light spring, for maintaining tension in a...RRP From £13.17RRP From £13.17 -
M6 Crinkle Washer BS 4463 A2 Stainless Steel
In stockThis M6 crinkle washer is manufactured to BS 4463 in A2 stainless steel (304 grade). BS 4463 specifies a lightly corrugated ring giving spring under the head, for light-duty locking on small fixings. The corrugations compress...RRP From £3.11RRP From £3.11 -
M6 Conical Spring Washer DIN 6796 A2 Stainless Steel
In stockThis M6 spring washer is manufactured to DIN 6796 in A2 stainless steel (304 grade). DIN 6796 specifies a split washer with a rectangular section and offset ends, for maintaining tension under vibration. The split ring...RRP From £3.04RRP From £3.04 -
M5 Wavey Washer DIN 137-B Stainless Steel
Out of stockThis M5 wave washer is manufactured to DIN 137-B in stainless steel. DIN 137-B specifies a ring waved along its circumference to act as a light spring, for taking up play and light axial preload. The...RRP From £7.17RRP From £7.17 -
M5 Square Sect Spring Washer DIN 7980 Stainless Steel
In stockThis M5 spring washer is manufactured to DIN 7980 in stainless steel. DIN 7980 specifies a split washer with a rectangular section and offset ends, for maintaining tension under vibration. The split ring is compressed flat...RRP From £2.52RRP From £2.52 -
M5 Square Sect Spring Washer DIN 7980 A4 Stainless Steel
In stockThis M5 spring washer is manufactured to DIN 7980 in A4 stainless steel (316 grade). DIN 7980 specifies a split washer with a rectangular section and offset ends, for maintaining tension under vibration. The split ring...RRP From £6.36RRP From £6.36 -
M5 Safety Locking Washer, Type S A2 Stainless Steel
In stockThis M5 safety locking washer is manufactured in A2 stainless steel (304 grade). The cam faces between the pair are steeper than the thread pitch, so any attempt to turn the nut has to lift the...RRP From £4.03RRP From £4.03 -
M5 Retaining Ring Washer DIN 6799 Martensitic Stainless Steel
In stockThis M5 retaining ring washer is manufactured to DIN 6799 in stainless steel. DIN 6799 specifies a sprung E-shaped ring that snaps into a shaft groove, for locating a component on a shaft without a thread....RRP From £9.45RRP From £9.45 -
M5 Rect Sect Spring Washer DIN 127-B A4 Stainless Steel
In stockThis M5 spring washer is manufactured to DIN 127-B in A4 stainless steel (316 grade). DIN 127-B specifies a split washer with a rectangular section and offset ends, for maintaining tension under vibration. The split ring...RRP From £11.02RRP From £11.02 -
M5 Internal Tooth Washer DIN 6798-J A4 Stainless Steel
In stockThis M5 internal tooth lock washer is manufactured to DIN 6798-J in A4 stainless steel (316 grade). DIN 6798-J specifies a washer with serrated teeth projecting inward around the bore, for resisting loosening where the teeth...RRP From £5.06RRP From £5.06
Spring & Lock Washers in A2 (304) and A4 (316) stainless steel. 321 products, with size and grade filters to narrow the list.