Snap it
Snap a fixing we will find it
Lost the packet? Take a photo of the screw, bolt, nut or washer next to a coin and we will tell you what it is, roughly what size, and where to get it in stainless.
1. What is next to it?
2. Take the photo
- Lay it flat on plain paper or a worktop, with the coin beside it, not on top
- Hold the phone directly above, and fill the frame
- One fixing per photo, in good light without heavy shadow
- Screws and bolts on their side, so we can see the head and the whole length
Your photo is only used to identify the part. We do not keep it.
Your match appears here
We will show what it is, a size estimate, and the matching stainless parts in A2 and A4 with prices.
Measuring against your coin
This usually takes 10 to 20 seconds.
That did not work
It looks plated or not stainless. Everything below is stainless steel, so it will not rust like the original.
A photo cannot show the thread pitch or tell A2 from A4 stainless, so check against the size guide if you can. A4 (316) is the one for coastal, pool and outdoor use.