Special Offers
-
6.3 X 25 Hex Head Self Drilling Screw DIN 7504-K A2 Stainless Steel
In stockRRP From £11.21 -
M8 Flat Washer, Form A DIN 125-A A2 Stainless Steel
In stockRRP From £2.69 -
M8 Nylon Insert Nut DIN 985 A2 Stainless Steel
In stockRRP From £3.23 -
M10 Hexagon Full Nut DIN 934 A2 Stainless Steel
In stockRRP From £3.99
-
6.3 X 25 Hex Head Self Drilling Screw DIN 7504-K A2 Stainless Steel
In stock6.3mm x 25mm hex head self-drilling screw in A2 stainless steel to DIN 7504-K. The drill-point tip bores and taps into aluminium and other compatible thin-gauge substrates in a single operation - no pre-drilling or tapping...RRP From £11.21RRP From £11.21 -
M8 Flat Washer, Form A DIN 125-A A2 Stainless Steel
In stockM8 flat washer in A2 stainless steel to DIN 125-A. Spreads clamping load under bolt heads and nuts, protecting timber, aluminium, and plastic substrates from damage. Good corrosion resistance for indoor and general outdoor assemblies. Free...RRP From £2.69RRP From £2.69 -
M6 X 20 Hex Socket Countersunk Screw ISO 10642 A2 Stainless Steel
In stockM6 x 20mm countersunk socket screw in A2 stainless steel to ISO 10642. Hex key driven with a flush countersunk head - suited to machinery panels, access covers, and cabinetwork where a clean surface finish is...RRP From £2.35RRP From £2.35 -
M6 Dome Nut DIN 1587 A4 Stainless Steel
In stockM6 dome nut in A4 stainless steel to DIN 1587. The domed cap covers the exposed end of a bolt thread for a safe, finished appearance - used on outdoor furniture, signage, architectural fixings, and play...RRP From £3.06RRP From £3.06 -
M6 Flat Washer, Form A DIN 125-A A4 Stainless Steel
In stockM6 flat washer in A4 stainless steel (316 marine grade) to DIN 125-A. Distributes clamping load under bolt heads and nuts, protecting timber, aluminium, and coated substrates from crushing or marking. A4 (316) resists saltwater and...RRP From £2.32RRP From £2.32 -
M6 Flat Washer, Form C BS4320-C A4 Stainless Steel
In stockM6 flat washer (Form C, large OD) in A4 stainless steel (316 marine grade) to BS4320-C. The large outer diameter spreads load over a wider area than a standard Form A washer - useful for oversized...RRP From £6.59RRP From £6.59 -
M5 Flat Washer, Form A DIN 125-A A2 Stainless Steel
In stockM5 flat washer in A2 stainless steel to DIN 125-A. Spreads clamping load under bolt heads and nuts, protecting timber, aluminium, and plastic substrates from damage. Good corrosion resistance for indoor and general outdoor assemblies. Free...RRP From £2.58RRP From £2.58 -
M6 Flat Washer, Form A DIN 125-A A2 Stainless Steel
In stockM6 flat washer in A2 stainless steel to DIN 125-A. Spreads clamping load under bolt heads and nuts, protecting timber, aluminium, and plastic substrates from damage. Good corrosion resistance for indoor and general outdoor assemblies. Free...RRP From £2.66RRP From £2.66 -
4.0 X 50 Poz Csk Wood Screw DIN 7997 A2 Stainless Steel
In stock4mm x 50mm Pozidriv countersunk wood screw in A2 stainless steel to DIN 7997. The sharp gimlet point drives cleanly into softwood and hardwood, with the countersunk head sitting flush once fully driven for a neat,...RRP From £23.25RRP From £23.25 -
M5 X 20 Hex Socket Countersunk Screw ISO 10642 A2-70 A2 Stainless Steel
In stockM5 x 20mm countersunk socket screw in A2 stainless steel to ISO 10642. Hex key driven with a flush countersunk head - suited to machinery panels, access covers, and cabinetwork where a clean surface finish is...RRP From £1.75RRP From £1.75 -
6.3 X 50 Hex Head Self Drilling Screw DIN 7504-K A2 Stainless Steel
In stock6.3mm x 50mm hex head self-drilling screw in A2 stainless steel to DIN 7504-K. The drill-point tip bores and taps into aluminium and other compatible thin-gauge substrates in a single operation - no pre-drilling or tapping...RRP From £11.51RRP From £11.51 -
5.5 X 25 Hex Head Self Drilling Screw DIN 7504-K A2 Stainless Steel
In stock5.5mm x 25mm hex head self-drilling screw in A2 stainless steel to DIN 7504-K. The drill-point tip bores and taps into aluminium and other compatible thin-gauge substrates in a single operation - no pre-drilling or tapping...RRP From £3.91RRP From £3.91 -
3.5 X 13 Poz Pan Tapping Screw DIN 7981-C A2 Stainless Steel
In stock3.5mm x 13mm Pozidriv pan head self-tapping screw in A2 stainless steel to DIN 7981-C. Thread-forming point cuts its own thread into suitable plastics, UPVC, aluminium and other compatible thin-gauge substrates without pre-tapping. A2 (304 grade)...RRP From £4.47RRP From £4.47 -
M5 X 20 Poz Csk Machine Screw DIN 965 A2 Stainless Steel
In stockM5 x 20mm Pozidriv countersunk machine screw in A2 stainless steel to DIN 965. The flat flush head sits level with the surface - suitable for pre-tapped metal assemblies, light engineering brackets, and electrical enclosures requiring...RRP From £2.97RRP From £2.97 -
M4 X 20 Poz Pan Machine Screw DIN 7985 A2 Stainless Steel
In stockM4 x 20mm Pozidriv pan head machine screw in A2 stainless steel to DIN 7985. The pan head profile and Pozidriv recess suit light engineering brackets, panel assemblies, and electrical enclosures where a screw head above...RRP From £2.19RRP From £2.19 -
M6 X 16 Hexagon Socket Button Flange ISO 7380-2 A2 Stainless Steel
In stockThis M6 x 16mm socket button head flange screw is manufactured to ISO 7380-2 in A2 stainless steel (304 grade). ISO 7380-2 specifies a low domed head with an integral flange, driven by an internal hexagon...RRP From £2.37RRP From £2.37 -
8 X 60 Eyebolt Wood Thread A4 Stainless Steel
Out of stockThis 8 x 60mm wood thread eye bolt is manufactured in A4 stainless steel (316 grade). The coarse thread cuts its own path into timber and the closed eye takes the line, giving a fixing that...RRP From £29.93RRP From £29.93 -
M4 X 6 Hexagon Socket Button ISO 7380-1 A4 Stainless Steel
In stockThis M4 x 6mm socket button head screw is manufactured to ISO 7380-1 in A4 stainless steel (316 grade). ISO 7380-1 specifies a low domed head driven by an internal hexagon socket, giving a rounded, finished...RRP From £3.91RRP From £3.91 -
M4 X 30 Hexagon Socket Button Flange ISO 7380-2 A2 Stainless Steel
In stockThis M4 x 30mm socket button head flange screw is manufactured to ISO 7380-2 in A2 stainless steel (304 grade). ISO 7380-2 specifies a low domed head with an integral flange, driven by an internal hexagon...RRP From £3.09RRP From £3.09 -
M4 X 10 Hex Socket Countersunk ISO 10642 A2 Stainless Steel
In stockThis M4 x 10mm socket countersunk screw is manufactured to ISO 10642 in A2 stainless steel (304 grade). ISO 10642 specifies a 90 degree countersunk head driven by an internal hexagon socket, allowing the head to...RRP From £3.21RRP From £3.21 -
M3 X 10 Six Lobe Pin Countersunk Security Screw TX10 A2 Stainless Steel
In stockThis M3 x 10mm six lobe pin countersunk security screw is manufactured in A2 stainless steel (304 grade).Typical applications Workshop, maintenance, and repair work Machinery assembly and equipment mounting General fabrication and engineering Brackets, frames, and...RRP From £4.97RRP From £4.97 -
M8 X 30 Penny Washer A4 Stainless Steel
In stockThis M8 x 30mm penny washer is manufactured in A4 stainless steel (316 grade). The oversized outer diameter spreads the clamping load across a much wider area than a standard washer, bridging oversized or slotted holes...RRP From £7.46RRP From £7.46 -
M6 X 50 Penny Washer A2 Stainless Steel
In stockThis M6 x 50mm penny washer is manufactured in A2 stainless steel (304 grade). The oversized outer diameter spreads the clamping load across a much wider area than a standard washer, bridging oversized or slotted holes...RRP From £8.51RRP From £8.51 -
M5 X 60 Poz Pan Machine Screw DIN 7985 A4 Stainless Steel
In stockThis M5 x 60mm pan head machine screw is manufactured to DIN 7985-Z in A4 stainless steel (316 grade). DIN 7985-Z specifies a pan head with a cross recess drive, for general assembly into tapped holes...RRP From £5.49RRP From £5.49 -
M6 X 30 Penny Washer A2 Stainless Steel
In stockThis M6 x 30mm penny washer is manufactured in A2 stainless steel (304 grade). The oversized outer diameter spreads the clamping load across a much wider area than a standard washer, bridging oversized or slotted holes...RRP From £2.59RRP From £2.59
Stainless steel fixings for jobs inside homes and workplaces: furniture and joinery, bathrooms and kitchens, signs and displays, and tamper-resistant fittings for public spaces.
A2 (304) covers dry rooms. Choose A4 (316) for bathrooms, kitchens and other humid or wet areas. Pick a project to see the fixings that suit it, in the sizes that job uses.