Special Offers
-
6.3 X 25 Hex Head Self Drilling Screw DIN 7504-K A2 Stainless Steel
In stockRRP From £11.21 -
M8 Flat Washer, Form A DIN 125-A A2 Stainless Steel
In stockRRP From £2.69 -
M8 Nylon Insert Nut DIN 985 A2 Stainless Steel
In stockRRP From £3.23 -
M10 Hexagon Full Nut DIN 934 A2 Stainless Steel
In stockRRP From £3.99
-
4.8 X 19 Poz Csk Tapping Screw DIN 7982-F A2 Stainless Steel
In stockThis 4.8 x 19mm countersunk self-tapping screw is manufactured to DIN 7982-F in A2 stainless steel (304 grade). DIN 7982-F specifies a 90 degree countersunk self-tapping screw with a cross recess drive, forming its own thread...RRP From £5.76RRP From £5.76 -
M8 X 22 Hexagon Head Set Screw DIN 933 A2 Stainless Steel
In stockThis M8 x 22mm fully threaded hex bolt is manufactured to DIN 933 in A2 stainless steel (304 grade). DIN 933 specifies a hex head bolt with thread running the full length of the shank, making...RRP From £2.45RRP From £2.45 -
100mm Cabin Hook A4 Stainless Steel
Out of stockThis 100 cabin hook is manufactured in A4 stainless steel (316 grade). The hook drops into a fixed eye and holds the leaf at a set distance, so it cannot swing shut in wind.Typical applications Holding...RRP From £25.88RRP From £25.88 -
4.8 X 22 Poz Pan Tapping Screw DIN 7981-C A2 Stainless Steel
In stockThis 4.8 x 22mm pan head self-tapping screw is manufactured to DIN 7981-C in A2 stainless steel (304 grade). DIN 7981-C specifies a pan head self-tapping screw with a cross recess drive, for forming its own...RRP From £6.17RRP From £6.17 -
3mm Fork Terminal A4 Stainless Steel
In stockThis 3 fork terminal is manufactured in A4 stainless steel (316 grade). The rope is fixed into the shank and the fork pins through a flat fitting, giving an in-line termination that can articulate.Typical applications Balustrade...RRP From £30.58RRP From £30.58 -
4.8 X 22 Poz Pan Self Drilling Screw DIN 7504-M A2 Stainless Steel
In stockThis 4.8 x 22mm pan head self-drilling screw is manufactured to DIN 7504-M(N) in A2 stainless steel (304 grade). DIN 7504-M(N) specifies a pan head self-drilling screw with a drill point, drilling, tapping, and fixing in...RRP From £6.62RRP From £6.62 -
4.8 X 22 Six Lobe Csk Self Drilling Screw DIN 7504-O A2 Stainless Steel
In stockThis 4.8 x 22mm countersunk self-drilling screw is manufactured to DIN 7504-O in A2 stainless steel (304 grade). DIN 7504-O specifies a countersunk self-drilling screw with a drill point and a six lobe recess, drilling, tapping,...RRP From £4.67RRP From £4.67 -
4.8 X 16 Slot Pan Tapping Screw DIN 7971-C A4 Stainless Steel
In stockThis 4.8 x 16mm pan head self-tapping screw is manufactured to DIN 7971-C in A4 stainless steel (316 grade). DIN 7971-C specifies a pan head self-tapping screw with a slotted drive, for forming its own thread...RRP From £9.12RRP From £9.12 -
150mm Low Flat Cleat Two A4 Stainless Steel
In stockThis 150 low Flat Cleat Two is manufactured in A4 stainless steel (316 grade).Typical applications Boat fittings, rigging, and deck hardware Dock, pontoon, and coastal installations Exposed structures in salt-laden or chloride-rich air Any fixing where...RRP From £43.93RRP From £43.93 -
M8 X 22 Hexagon Head Set Screw DIN 933 A4-80 A4 Stainless Steel
In stockThis M8 x 22mm fully threaded hex bolt is manufactured to DIN 933 in A4 stainless steel (316 grade). DIN 933 specifies a hex head bolt with thread running the full length of the shank, making...RRP From £9.56RRP From £9.56 -
M8 X 170 Hexagon Head Set Screw DIN 933 A2 Stainless Steel
In stockThis M8 x 170mm fully threaded hex bolt is manufactured to DIN 933 in A2 stainless steel (304 grade). DIN 933 specifies a hex head bolt with thread running the full length of the shank, making...RRP From £8.94RRP From £8.94 -
M8 X 200 Hexagon Head Bolt DIN 931 A4 Stainless Steel
In stockThis M8 x 200mm part threaded hex bolt is manufactured to DIN 931 in A4 stainless steel (316 grade). DIN 931 specifies a hex head bolt with a plain shank beneath the head and thread over...RRP From £26.51RRP From £26.51 -
200mm Low Flat Cleat Four A4 Stainless Steel
In stockThis 200 low Flat Cleat Four is manufactured in A4 stainless steel (316 grade).Typical applications Boat fittings, rigging, and deck hardware Dock, pontoon, and coastal installations Exposed structures in salt-laden or chloride-rich air Any fixing where...RRP From £44.11RRP From £44.11 -
4.8 X 16 Slot Pan Tapping Screw DIN 7971-F A2 Stainless Steel
In stockThis 4.8 x 16mm pan head self-tapping screw is manufactured to DIN 7971-F in A2 stainless steel (304 grade). DIN 7971-F specifies a pan head self-tapping screw with a slotted drive, for forming its own thread...RRP From £3.84RRP From £3.84 -
12mm Shackle Straight A4 Stainless Steel
In stockThis 12 straight D shackle is manufactured in A4 stainless steel (316 grade). The straight sides keep the load in line with the pin, so the shackle takes its pull along the body rather than spreading...RRP From £17.63RRP From £17.63 -
M8 X 190 Hexagon Head Set Screw DIN 933 A2 Stainless Steel
In stockThis M8 x 190mm fully threaded hex bolt is manufactured to DIN 933 in A2 stainless steel (304 grade). DIN 933 specifies a hex head bolt with thread running the full length of the shank, making...RRP From £12.36RRP From £12.36 -
4.8 X 16 Slot Pan Tapping Screw DIN 7971-C A2 Stainless Steel
In stockThis 4.8 x 16mm pan head self-tapping screw is manufactured to DIN 7971-C in A2 stainless steel (304 grade). DIN 7971-C specifies a pan head self-tapping screw with a slotted drive, for forming its own thread...RRP From £6.99RRP From £6.99 -
M8 X 30 Hexagon Head Set Screw DIN 933 A4-70 A4 Stainless Steel
In stockThis M8 x 30mm fully threaded hex bolt is manufactured to DIN 933 in A4 stainless steel (316 grade). DIN 933 specifies a hex head bolt with thread running the full length of the shank, making...RRP From £3.01RRP From £3.01 -
10mm Shackle Straight A4 Stainless Steel
Out of stockThis 10 straight D shackle is manufactured in A4 stainless steel (316 grade). The straight sides keep the load in line with the pin, so the shackle takes its pull along the body rather than spreading...RRP From £11.59RRP From £11.59 -
4.8 X 16 Six Lobe Pan Self Drilling Screw DIN 7504-M A2 Stainless Steel
In stockThis 4.8 x 16mm pan head self-drilling screw is manufactured to DIN 7504-M(N) in A2 stainless steel (304 grade). DIN 7504-M(N) specifies a pan head self-drilling screw with a drill point, drilling, tapping, and fixing in...RRP From £6.12RRP From £6.12 -
4.8 X 19 Slot Csk Tapping Screw DIN 7972-F A2 Stainless Steel
In stockThis 4.8 x 19mm countersunk self-tapping screw is manufactured to DIN 7972-F in A2 stainless steel (304 grade). DIN 7972-F specifies a countersunk self-tapping screw with a slotted drive, forming its own thread while finishing flush....RRP From £4.27RRP From £4.27 -
4.8 X 19 Six Lobe Csk Self Drilling Screw DIN 7504-O A2 Stainless Steel
In stockThis 4.8 x 19mm countersunk self-drilling screw is manufactured to DIN 7504-O in A2 stainless steel (304 grade). DIN 7504-O specifies a countersunk self-drilling screw with a drill point and a six lobe recess, drilling, tapping,...RRP From £4.58RRP From £4.58 -
4.8 X 16 Six Lobe Csk Tapping Screw ISO 14586-C A2 Stainless Steel
In stockThis 4.8 x 16mm six lobe countersunk self-tapping screw is manufactured to ISO 14586-C in A2 stainless steel (304 grade). ISO 14586-C specifies a countersunk self-tapping screw driven by a six lobe recess, forming its own...RRP From £5.61RRP From £5.61 -
M8 X 180 Hexagon Head Set Screw DIN 933 A2 Stainless Steel
In stockThis M8 x 180mm fully threaded hex bolt is manufactured to DIN 933 in A2 stainless steel (304 grade). DIN 933 specifies a hex head bolt with thread running the full length of the shank, making...RRP From £5.41RRP From £5.41 -
M8 X 180 Hexagon Head Bolt DIN 931 A4-80 A4 Stainless Steel
In stockThis M8 x 180mm part threaded hex bolt is manufactured to DIN 931 in A4 stainless steel (316 grade). DIN 931 specifies a hex head bolt with a plain shank beneath the head and thread over...RRP From £22.03RRP From £22.03
Stainless steel fixings for outside jobs: decking and garden timber, fences and gates, roofing and cladding, fixing into masonry and concrete, wire balustrades and rigging, and heavy structural bolting.
A2 (304) suits most inland outdoor work. Choose A4 (316) within reach of salt air or where fixings stay wet.