Special Offers
-
6.3 X 25 Hex Head Self Drilling Screw DIN 7504-K A2 Stainless Steel
In stockRRP From £11.21 -
M8 Flat Washer, Form A DIN 125-A A2 Stainless Steel
In stockRRP From £2.69 -
M8 Nylon Insert Nut DIN 985 A2 Stainless Steel
In stockRRP From £3.23 -
M10 Hexagon Full Nut DIN 934 A2 Stainless Steel
In stockRRP From £3.99
-
M8 X 40 Hexagon Head Set Screw DIN 933 A4-80 A4 Stainless Steel
In stockThis M8 x 40mm fully threaded hex bolt is manufactured to DIN 933 in A4 stainless steel (316 grade). DIN 933 specifies a hex head bolt with thread running the full length of the shank, making...RRP From £4.92RRP From £4.92 -
50mm Spring Hook A4 Stainless Steel
In stockThis 50 spring snap hook is manufactured in A4 stainless steel (316 grade). The gate is pushed open against its spring and snaps shut on release, so a connection can be made one-handed and will not...RRP From £28.85RRP From £28.85 -
70mm Spring Hook A4 Stainless Steel
In stockThis 70 spring snap hook is manufactured in A4 stainless steel (316 grade). The gate is pushed open against its spring and snaps shut on release, so a connection can be made one-handed and will not...RRP From £34.97RRP From £34.97 -
4.8 X 25 Poz Csk Self Drilling Screw DIN 7504-P A2 Stainless Steel
In stockThis 4.8 x 25mm countersunk self-drilling screw is manufactured to DIN 7504-P in A2 stainless steel (304 grade). DIN 7504-P specifies a countersunk self-drilling screw with a drill point and a six lobe recess, drilling, tapping,...RRP From £2.23RRP From £2.23 -
4.8 X 19 Slot Raised Csk Tapping Screw DIN 7973-C A2 Stainless Steel
In stockThis 4.8 x 19mm raised countersunk self-tapping screw is manufactured to DIN 7973-C in A2 stainless steel (304 grade). DIN 7973-C specifies a raised countersunk self-tapping screw with a slotted drive, for a self-tapped fixing with...RRP From £6.40RRP From £6.40 -
52mm Sheet Snap Shackle A4 Stainless Steel
In stockThis 52 sheet Snap Shackle is manufactured in A4 stainless steel (316 grade). No working load limit is stated for this product, so do not use it for lifting or overhead loads.Typical applications Boat fittings, rigging,...RRP From £28.99RRP From £28.99 -
M8 X 30 Hexagon Head Bolt DIN 931 A2 Stainless Steel
In stockThis M8 x 30mm part threaded hex bolt is manufactured to DIN 931 in A2 stainless steel (304 grade). DIN 931 specifies a hex head bolt with a plain shank beneath the head and thread over...RRP From £2.70RRP From £2.70 -
150mm Low Flat Cleat Four A4 Stainless Steel
Out of stockThis 150 low Flat Cleat Four is manufactured in A4 stainless steel (316 grade).Typical applications Boat fittings, rigging, and deck hardware Dock, pontoon, and coastal installations Exposed structures in salt-laden or chloride-rich air Any fixing where...RRP £15.87RRP £15.87 -
52mm Fixed Snap Shackle A4 Stainless Steel
In stockThis 52 fixed Snap Shackle is manufactured in A4 stainless steel (316 grade). No working load limit is stated for this product, so do not use it for lifting or overhead loads.Typical applications Boat fittings, rigging,...RRP From £18.19RRP From £18.19 -
4.8 X 19 Poz Pan Tapping Screw DIN 7981-F A2 Stainless Steel
In stockThis 4.8 x 19mm pan head self-tapping screw is manufactured to DIN 7981-F in A2 stainless steel (304 grade). DIN 7981-F specifies a pan head self-tapping screw with a cross recess drive, for forming its own...RRP From £6.04RRP From £6.04 -
4.8 X 25 Phil Pan Tapping Screw DIN 7981-C A2 Stainless Steel
In stockThis 4.8 x 25mm pan head self-tapping screw is manufactured to DIN 7981-C in A2 stainless steel (304 grade). DIN 7981-C specifies a pan head self-tapping screw with a cross recess drive, for forming its own...RRP From £7.50RRP From £7.50 -
87mm Swivel Snap Shackle A4 Stainless Steel
In stockThis 87 swivel snap shackle is manufactured in A4 stainless steel (316 grade). The gate opens with one hand and snaps closed on release, while the swivel lets the attached line turn freely instead of building...RRP From £25.39RRP From £25.39 -
4.8 X 19 Slot Pan Tapping Screw DIN 7971-C A2 Stainless Steel
In stockThis 4.8 x 19mm pan head self-tapping screw is manufactured to DIN 7971-C in A2 stainless steel (304 grade). DIN 7971-C specifies a pan head self-tapping screw with a slotted drive, for forming its own thread...RRP From £4.15RRP From £4.15 -
4.8 X 25 Poz Pan Self Drilling Screw DIN 7504-M A2 Stainless Steel
In stockThis 4.8 x 25mm pan head self-drilling screw is manufactured to DIN 7504-M(N) in A2 stainless steel (304 grade). DIN 7504-M(N) specifies a pan head self-drilling screw with a drill point, drilling, tapping, and fixing in...RRP From £3.33RRP From £3.33 -
4.8 X 25 Poz Pan Tapping Screw DIN 7981-F A2 Stainless Steel
In stockThis 4.8 x 25mm pan head self-tapping screw is manufactured to DIN 7981-F in A2 stainless steel (304 grade). DIN 7981-F specifies a pan head self-tapping screw with a cross recess drive, for forming its own...RRP From £6.38RRP From £6.38 -
M8 X 45 Hexagon Head Bolt DIN 931 A2 Stainless Steel
In stockThis M8 x 45mm part threaded hex bolt is manufactured to DIN 931 in A2 stainless steel (304 grade). DIN 931 specifies a hex head bolt with a plain shank beneath the head and thread over...RRP From £4.17RRP From £4.17 -
128mm Swivel Snap Shackle A4 Stainless Steel
In stockThis 128 swivel snap shackle is manufactured in A4 stainless steel (316 grade). The gate opens with one hand and snaps closed on release, while the swivel lets the attached line turn freely instead of building...RRP From £22.39RRP From £22.39 -
16mm Shackle Straight A4 Stainless Steel
In stockThis 16 straight D shackle is manufactured in A4 stainless steel (316 grade). The straight sides keep the load in line with the pin, so the shackle takes its pull along the body rather than spreading...RRP From £38.10RRP From £38.10 -
M8 X 30 Hexagon Head Bolt DIN 931 A4-80 A4 Stainless Steel
In stockThis M8 x 30mm part threaded hex bolt is manufactured to DIN 931 in A4 stainless steel (316 grade). DIN 931 specifies a hex head bolt with a plain shank beneath the head and thread over...RRP From £3.01RRP From £3.01 -
4.8 X 22 Slot Raised Csk Tapping Screw DIN 7973-C A2 Stainless Steel
Out of stockThis 4.8 x 22mm raised countersunk self-tapping screw is manufactured to DIN 7973-C in A2 stainless steel (304 grade). DIN 7973-C specifies a raised countersunk self-tapping screw with a slotted drive, for a self-tapped fixing with...RRP From £4.42RRP From £4.42 -
4.8 X 25 Phil Csk Tapping Screw DIN 7982-C A2 Stainless Steel
In stockThis 4.8 x 25mm countersunk self-tapping screw is manufactured to DIN 7982-C in A2 stainless steel (304 grade). DIN 7982-C specifies a 90 degree countersunk self-tapping screw with a cross recess drive, forming its own thread...RRP From £6.94RRP From £6.94 -
6mm Shackle Straight A4 Stainless Steel
In stockThis 6 straight D shackle is manufactured in A4 stainless steel (316 grade). The straight sides keep the load in line with the pin, so the shackle takes its pull along the body rather than spreading...RRP From £14.29RRP From £14.29 -
125mm Hollow Base Cleat Four A4 Stainless Steel
In stockThis 125 four hole hollow base cleat is manufactured in A4 stainless steel (316 grade). The horns hold a figure-of-eight turn under tension and the hollow base spreads the load across four fixings.Typical applications Mooring and...RRP From £22.56RRP From £22.56 -
M8 X 40 Hexagon Head Bolt DIN 931 A4-80 A4 Stainless Steel
In stockThis M8 x 40mm part threaded hex bolt is manufactured to DIN 931 in A4 stainless steel (316 grade). DIN 931 specifies a hex head bolt with a plain shank beneath the head and thread over...RRP From £5.30RRP From £5.30 -
4.8 X 19 Six Lobe Pan Tapping Screw ISO 14585-C A2 Stainless Steel
In stockThis 4.8 x 19mm six lobe pan head self-tapping screw is manufactured to ISO 14585-C in A2 stainless steel (304 grade). ISO 14585-C specifies a pan head self-tapping screw driven by a six lobe recess, forming...RRP From £6.02RRP From £6.02
Stainless steel fixings for outside jobs: decking and garden timber, fences and gates, roofing and cladding, fixing into masonry and concrete, wire balustrades and rigging, and heavy structural bolting.
A2 (304) suits most inland outdoor work. Choose A4 (316) within reach of salt air or where fixings stay wet.