Special Offers
-
6.3 X 25 Hex Head Self Drilling Screw DIN 7504-K A2 Stainless Steel
In stockRRP From £11.21 -
M8 Nylon Insert Nut DIN 985 A2 Stainless Steel
In stockRRP From £3.23 -
M6 X 20 Hex Non-Serrated Flange Screw DIN 6921 A2-70 A2 Stainless Steel
In stockRRP From £2.58 -
M8 Flat Washer, Form A DIN 125-A A2 Stainless Steel
In stockRRP From £2.69
-
M6 Square Sect Spring Washer DIN 7980 A4 Stainless Steel
In stockThis M6 spring washer is manufactured to DIN 7980 in A4 stainless steel (316 grade). DIN 7980 specifies a split washer with a rectangular section and offset ends, for maintaining tension under vibration. The split ring...RRP From £2.71RRP From £2.71 -
M6 Square Sect Spring Washer DIN 7980 Stainless Steel
In stockThis M6 spring washer is manufactured to DIN 7980 in stainless steel. DIN 7980 specifies a split washer with a rectangular section and offset ends, for maintaining tension under vibration. The split ring is compressed flat...RRP From £2.89RRP From £2.89 -
M6 External Tooth Washer DIN 6798-A A2 Stainless Steel
In stockThis M6 external tooth lock washer is manufactured to DIN 6798-A in A2 stainless steel (304 grade). DIN 6798-A specifies a washer with serrated teeth projecting around the outer edge, for resisting loosening under vibration. The...RRP From £2.39RRP From £2.39 -
M10 Rect Sect Spring Washer DIN 127-B A4 Stainless Steel
In stockM10 spring washer in A4 stainless steel to DIN 127-B. Exerts continuous axial spring load on the nut face once tightened, resisting loosening under vibration and dynamic loading without thread locking compound. A4 (316) marine grade...RRP From £3.54RRP From £3.54 -
No.8 Rect Sect Spring Washer ANSI/ASME B18.21.1 Stainless Steel
In stockThis spring washer is manufactured to ANSI/ASME B18.21.1 in stainless steel. ANSI/ASME B18.21.1 specifies the imperial series of helical spring lock washers, for maintaining tension under vibration. The split ring compresses flat as the joint is...RRP From £6.99RRP From £6.99 -
No.6 Rect Sect Spring Washer ANSI/ASME B18.21.1 Stainless Steel
In stockThis spring washer is manufactured to ANSI/ASME B18.21.1 in stainless steel. ANSI/ASME B18.21.1 specifies the imperial series of helical spring lock washers, for maintaining tension under vibration. The split ring compresses flat as the joint is...RRP From £6.83RRP From £6.83 -
No.4 Square Sect Spring Washer Stainless Steel
Out of stockThis spring washer is manufactured in stainless steel. The split ring is compressed flat under tightening and pushes back against the nut face, maintaining tension in the joint and helping resist loosening from vibration.Typical applications Joints...RRP From £6.95RRP From £6.95 -
No.2 Rect Sect Spring Washer ANSI/ASME B18.21.1 Stainless Steel
Out of stockThis spring washer is manufactured to ANSI/ASME B18.21.1 in stainless steel. ANSI/ASME B18.21.1 specifies the imperial series of helical spring lock washers, for maintaining tension under vibration. The split ring compresses flat as the joint is...RRP From £6.41RRP From £6.41 -
M8 Wavey Washer DIN 137-B Stainless Steel
In stockThis M8 wave washer is manufactured to DIN 137-B in stainless steel. DIN 137-B specifies a ring waved along its circumference to act as a light spring, for taking up play and light axial preload. The...RRP From £4.20RRP From £4.20 -
M8 Square Sect Spring Washer DIN 7980 Stainless Steel
In stockThis M8 spring washer is manufactured to DIN 7980 in stainless steel. DIN 7980 specifies a split washer with a rectangular section and offset ends, for maintaining tension under vibration. The split ring is compressed flat...RRP From £2.37RRP From £2.37 -
M8 Square Sect Spring Washer DIN 7980 A4 Stainless Steel
In stockThis M8 spring washer is manufactured to DIN 7980 in A4 stainless steel (316 grade). DIN 7980 specifies a split washer with a rectangular section and offset ends, for maintaining tension under vibration. The split ring...RRP From £2.73RRP From £2.73 -
M8 Single Tab Washer DIN 93 A4 Stainless Steel
In stockThis M8 single tab washer is manufactured to DIN 93 in A4 stainless steel (316 grade). DIN 93 specifies a washer with one tab that is bent up against the nut flat, for a positive mechanical...RRP From £14.31RRP From £14.31 -
M8 Single Tab Washer DIN 93 A2 Stainless Steel
In stockThis M8 single tab washer is manufactured to DIN 93 in A2 stainless steel (304 grade). DIN 93 specifies a washer with one tab that is bent up against the nut flat, for a positive mechanical...RRP From £3.87RRP From £3.87 -
M8 Safety Locking Washer, Type S A2 Stainless Steel
In stockThis M8 safety locking washer is manufactured in A2 stainless steel (304 grade). The cam faces between the pair are steeper than the thread pitch, so any attempt to turn the nut has to lift the...RRP From £5.44RRP From £5.44 -
M8 Rect Sect Spring Washer DIN 127-B Stainless Steel
In stockThis M8 spring washer is manufactured to DIN 127-B in stainless steel. DIN 127-B specifies a split washer with a rectangular section and offset ends, for maintaining tension under vibration. The split ring is compressed flat...RRP From £3.10RRP From £3.10 -
M8 Internal Tooth Washer DIN 6798-J A4 Stainless Steel
In stockThis M8 internal tooth lock washer is manufactured to DIN 6798-J in A4 stainless steel (316 grade). DIN 6798-J specifies a washer with serrated teeth projecting inward around the bore, for resisting loosening where the teeth...RRP From £7.50RRP From £7.50 -
M8 Internal Tooth Washer DIN 6798-J A2 Stainless Steel
In stockThis M8 internal tooth lock washer is manufactured to DIN 6798-J in A2 stainless steel (304 grade). DIN 6798-J specifies a washer with serrated teeth projecting inward around the bore, for resisting loosening where the teeth...RRP From £4.20RRP From £4.20 -
M8 Internal Tooth Washer DIN 6797-J A2 Stainless Steel
In stockThis M8 external tooth lock washer is manufactured to DIN 6797-J in A2 stainless steel (304 grade). DIN 6797-J specifies a washer with twisted teeth around the outer edge, for resisting loosening under vibration. The twisted...RRP From £2.39RRP From £2.39 -
M8 External Tooth Washer DIN 6798-A A4 Stainless Steel
In stockThis M8 external tooth lock washer is manufactured to DIN 6798-A in A4 stainless steel (316 grade). DIN 6798-A specifies a washer with serrated teeth projecting around the outer edge, for resisting loosening under vibration. The...RRP From £11.83RRP From £11.83 -
M8 External Tooth Washer DIN 6798-A A2 Stainless Steel
In stockThis M8 external tooth lock washer is manufactured to DIN 6798-A in A2 stainless steel (304 grade). DIN 6798-A specifies a washer with serrated teeth projecting around the outer edge, for resisting loosening under vibration. The...RRP From £3.49RRP From £3.49 -
M8 External Tooth Washer DIN 6797 A2 Stainless Steel
In stockThis M8 external tooth lock washer is manufactured to DIN 6797 in A2 stainless steel (304 grade). DIN 6797 specifies a washer with twisted teeth around the outer edge, for resisting loosening under vibration. The twisted...RRP From £5.25RRP From £5.25 -
M8 Curved Spring Washer DIN 128-A Stainless Steel
In stockThis M8 curved spring washer is manufactured to DIN 128-A in stainless steel. DIN 128-A specifies a washer curved along its length to act as a light spring, for maintaining tension in a joint. The curve...RRP From £8.58RRP From £8.58 -
M8 Curved Spring Washer DIN 128-A A4 Stainless Steel
In stockThis M8 curved spring washer is manufactured to DIN 128-A in A4 stainless steel (316 grade). DIN 128-A specifies a washer curved along its length to act as a light spring, for maintaining tension in a...RRP From £15.28RRP From £15.28 -
M8 Crinkle Washer BS 4463 A2 Stainless Steel
In stockThis M8 crinkle washer is manufactured to BS 4463 in A2 stainless steel (304 grade). BS 4463 specifies a lightly corrugated ring giving spring under the head, for light-duty locking on small fixings. The corrugations compress...RRP From £3.55RRP From £3.55 -
M8 Conical Spring Washer DIN 6796 A2 Stainless Steel
In stockThis M8 spring washer is manufactured to DIN 6796 in A2 stainless steel (304 grade). DIN 6796 specifies a split washer with a rectangular section and offset ends, for maintaining tension under vibration. The split ring...RRP From £5.89RRP From £5.89
Spring & Lock Washers in A2 (304) and A4 (316) stainless steel. 321 products, with size and grade filters to narrow the list.